2.7 Water does not stop
YES
NO
NO
2.TROUBLESHOOTING
YES
YES
YES
YES
NO
NO
NO
Whether Water Inlet
Valve bilging when turn
on the tap before switch
on the power
Change Water Inlet Valve
Whether Water Inlet
Valve bilging when
switches on the power
before Press the start
button
Change Controller Board
Then confirm whether Water
Inlet Valve is in good condition
Confirm whether the wire
connect
Controller Board and
Water Level Sensor is
impassability
Change Internal
Wire Subassembly
Choose water level 1
or water level 2 to
startup; check the gas
chamber whether there
is water
Leakage, please overhaul
gas leading system
Install airway, please gelatinize.
Install gas battery-compartment
cover, please use sealing glue
Whether gas leading
system is blocked
Clear various kinds of
factors like foreign
matter etc.
From conducting pressure pipe
joint separately to water level
sensor and the gas chamber blows,
whether have hindered.
Change water level sensor
9
