background image

 

 

4

Electrical

 

Connection

 

 

 
 
 
 
 

This  freezer  should  be  properly  grounded  for  your  safety.    The  power  cord  of  this  freezer  is  equipped  with  a 
three-prong  plug  which  mates  with  standard  three  prong  wall  outlets  to  minimize  the  possibility  of  electrical 
shock. 
 
Do not, under any circumstances, cut or remove the third ground prong from the power cord supplied. 
 
This freezer requires a standard 115/120 Volt A.C.  ~/60Hz electrical outlet with three-prong ground. 
 
This freezer is not designed to be used with an inverter. 
 
The cord should be secured behind the freezer and not left exposed or dangling to prevent accidental injury. 

 

Never unplug the freezer by pulling the power cord.  Always grip the plug firmly and pull straight out from the 
receptacle. 
 
Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician or 
service  technician  install  an  outlet  near  the  appliance.   Use  of  an  extension  cord  can  negatively  affect  the 
performance of the unit. 
 

 

a

WARNING

a

 

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is 
damaged, have it replaced by an authorized service center. 

Summary of Contents for PFV1375MW










Reviews: