P-3
THE PRODUCT’S FEATURES
!
Unique Profile: New tide personalized design, leading the market’s new tides.
!
The sapphire golden silicon tank: Rust-proof, Erosion-proof, Anti-leakage, More advanced with high
efficiencies & longer longevity.
!
High efficiencies energy saving & temperature maintaining heat isolation layer: Adopting the
thickened non-fluorine amine-gathering resin whole body’s bubble-making heater isolation layers,
good temperature-keeping performance. Reducing the heat loss with the maximum degrees. Under
the electricity cutting off and the and the temperature keeping conditions, still exiting the hot water
for provisions within 48 hours.
!
Rated power heating: 1500W.
!
The water pressure: normal use in the range of 0.02-0.07 MPa.
SECURITY CHARACTERISTICS
!
Security Valve: This electric water heater fits a mono-directional security valve. It must be installed at
the water entering hole sector of this unit of the electric water heater .When the tank’s pressure is
over 0.8 MPa, this valve will automatically leak the pressure. It may exit the water drops to fall down
at the pressure leakage mouth sector. In any conditions, this pressure leakage mouth must not to be
blocked. You must keep it anti-through with the atmosphere. (Diagram 1)
Note:
For the interior-ventilating styled security valve, its pressure leakage exit sector may not exits
the water drops to drip down. Otherwise, during the heating procedure, the water-entering pipe’s
outer cover under the safety valve may have a certain temperature. This belongs to the normal
conditions. This indicates that it is internally-draining the leakage pressure.
!
If needing to make the tank empty, firstly close the water-entering valve door, open the water-exiting
valve door. Then tear down the fixed screw nails on the security valve with tools. Make the plastic
handle lift up; let the water in the tank naturally flow out. (Diagram 2)
