Premier SCR-4709TVD, Instruction Manual

Page: 31 / 59

P-30
AV IN OPERATION
On the front panel of this unit, there is an
AUX IN jack, follow the diagram below to
connect analogue replay devices(only
for the Audio connect, if you want to
connect the Video, please plug the RCA
<Video input > on the back of the unit .) .
Use this jack to replay sound of other
replay equipment such as Digital Video
players, computers, etc. Via the loud
speakers.
-
3). You now hear the sound from the
external device played back through
the loudspeakers .
4). use the VOL+/- on the front panel to
adjust the volume level.
Important Note:
1. During the USB playback, you can
press the MODE button to select other
mode to play .
2. During the DISC playback, if you want
to play the USB, please first remove USB
and then connect it again to start (when
the Disc and USB in this player).
3. When the DISC and USB in this player,
they can not to transfer .
In USB Playback mode
REPEAT
REPEAT
You can use the UP, DOWN, RIGHT or
LEFT buttons to navigate and to select
files to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files).
To skip to the next or last track,
press the or . Press the or
buttons for Fast Forward or Fast
Reverse playback.
play modes are also available
by repeatedly pushing until
the desired mode is found.
USB OPERATION
First remove the dust protection cap ,
then following the diagram below,
connect your device to the USB port of
the unit . If it is properly connected, the
device will be mounted and start playing
automatically. (All operations are as
same as Digital Video mode .)
1). Please connect the external device
with stereo jack plug the Aux in socket .
AUX IN JACK FRONT PANEL
Ground
Right
Left
2). In any mode, press the “MODE” to
choose the AV IN mode, the message
will like following as below :
Note : The supported max. memory size
of USB:32GB.