Premier SCR-4709TVD, Instruction Manual

Page: 13 / 59

BASIC OPERATION
2. (POWER On/Off)/MOD Button
Press it to switch the device ON, press
and hold (approximately 2 seconds) to
switch the device OFF . During the
playback mode, you can press it to select
an input mode by pressing repeatedly
until proper one is found: >RADIO>DISC
>USB>CARD>TV>AV IN>BT MUSIC>
1. OPEN Button
Press it to flip down the front panel , then
you can insert the CD disc into the CD
compartment. You can also press the
Eject button(13) to eject the disc.
Control panel
MUTE SEL
E
Q
A
P
S
B
N
D
C
H
1
-6
AUX IN
USB IN
IR
OPEN
VOLUME
/MOD
PAIR
MIC
2
1 15
17
8
16
14 19
3 7 6 11
4
5 10 9
12
18
13
20
3. VOL knob
In normal mode, this knob is used to
increase or decrease the volume.
If the SEL button is pressed beforehand,
changes can be made in the menus,
e.g. Sound mode .
4. utton
Briefly press to switch between BASS,
TREBLE, BALANCE, FADE, COLOR,
BRIGHTNESS, CONTRAST, TINT and
VOLUME; Long press to display BT, then
briefly press to switch between LOUD,
SEL B
SUBWOOFER, EQ, LOCAL/DX(in radio
mode), STEREO/MONO(in radio mode),
CLK FMT, SET CLK, FREQUENCY AREA,
ANIMATION, WALLPAPER and TV
SYSTEM. After selecting an item above,
use VOL knob to adjust.
P-12
5. BAND/ Button
In Radio mode, press this button repeat-
edly (or the BAND button on the remote
control) to cycle through and select the
desired radio band, the designation of
the corresponding level- FM1, FM2,
FM3, AM1(MW1), AM2(MW2)- is shown
in the TFT.