P-3
remove the plug from the outletr, and bleed all pressure from the
system before servicing the compressor, and when the compressor is
not in use.
4. Chcck the manufacturer'rs maximum pressure rating for air t o o ls
and accessories. Compressor outlet pressure must be regu lated so as to
never exceed the maximum pressure rating of the tool.
5. H igh temperatu r es a nd mov i ng pa rts a re pres e nt un d er the s h r oud.
To prevent burns or other injuries, DO NOT operate with the shroud
removed. Allow the copmpressor parts to cool before handling or
servicing.
6. Be cert a in to re ad all lab els wh en y ou are spray i ng pain
ts or toxic
materials, and follow the safety instructions. Use a respirator mask if
there is a chance of inhaling anything you are spraying. Read all
insrtuctions and be sure that your respirator mask will protect you.
7. Alw a ys w e ar saf e ty gogg les or glas s es wh en usi ng an air c o m
pressor.
Never point any nozzle or sprayer toward a person or any part of the
body.
8. D
o n ot adj u
st the press ure swi t ch or re l ief va lve f or a ny reason, D
o
i ng
so voids all warraanties, They have been pre-set at the factory for the
maxinum pressure of this unit.
CAUTION-A POTENTIALL HAZARD THAT MAY CAUSE
MODERA TE INJU RY O
R DAMA GE TO EQUIPMENT.
1. Dr a in t h
e
mosit u re fr o m
t h
e
ta nk on
a da ily ba s i s. A clean,
dry tank will help prevent corrosion.
2. P u ll t he press u re re l ief va l ve r i n
g da ily to ens u re t h at t he valve
is functioning properly, and to clear the valve of any possible Obstructions.
3. T
o prov i de pro p er ventilat i on f or cooli n
g, t he compres s or must
be kept a minimum of 31cm(12 inches) form the nearest wall, in a
well-ventilated area.
4. Fast en t he compres s or do w
n secur ely if transport i ng is n
e c essary,
Pressure must be released from the tank before transporting.
5. Prot ect t he air h o se a nd elect ric co rd fr o m dam a ge and p
u n cture.
Inspect them weekly for weak or worn spots, and replace if necessary.
WARNING!
WWW.PREMIERMUNDO.COM
WWW.PREMIERMUNDO.COM
DISCONNECT POWER AND RELE ASE ALL
PRESSURE FROM THE SYSTEM BEFORE
ATTEMPTING TO INSTALL, SERVICE,
RELOCATE OR PERFORM ANY
MAINTENANCE.
1. Follow all local electrical and safety codes as
well as National Electrical Codes( NEC ) and
Occupational Safety and Health Act (OSHA).
2. Electric motors and starters must be securely
and adequately grounded using a three-pronged
Outlet.
