P-6
Safety tips and precautions
-
Please read this instruction carefully before using the appliance.
-
Unpack the appliance completely and check that it is full working order, since and factory defect or
possible damage caused by transportation is covered by the warranty.
When using the coffee maker for the first time
Before making coffee for the first time, run the coffee maker once with water only (without coffee or
filter).
Plug the coffee maker into the power outlet. Remove the lid from the glass coffee pot and fill it with
water. Use only cold water. Pour the water from the carafe into the reservoir and put the carafe (with the
lid on) back on the warm-plate. Start the coffee making process by turning on the power switch.
To make coffee
Lift the reservoir lid and fill the reservoir with cold water from the tap, depending on the number of cups
of coffee you with to prepare. The water level indicator shows the number of cups (1cup=100ml).
Place the permanent filter in the brew basket and fill it with ground coffee. Put in 6 or 7 grams of ground
coffee per cup. To use the carafe , put it (with the lid on) on the warm-plate and position the brew
basket. Close the lid of the appliance. The pilot light will turn on , indicating that the coffee maker is on.
Once the coffee is made, the coffee in the carafe will be kept warm as long as the coffee maker is on.
The non-drip mechanism prevents the filter from dripping after the carafe is removed or the brew basket
is tilted.
Cleaning
Always unplug the coffee maker before cleaning. To clean, wipe with a damp cloth moistened with a few
drops of detergent.
Do not immerse the appliance in water or any other liquid.
Do not place it under the tap.
The carafe may be cleaned with warm water, a washing liquid and soft brush. Do not place in the
dishwasher!
WATER
TANK LID
FILTER CUP
GLASS
HOT PLATE
WATER
TANK
POWER
SWITCH
Summary of Contents for CM-4675
Page 9: ...P 8...
