14
15
STEP 3: Control Test
IMPORTANT:
ALWAYS TURN TRANSMITTER “ON” FIRST BEFORE POWERING UP VECTOR KITE™. ALWAYS
DE-POWER VECTOR KITE™ BEFORE TUNRNING TRANSMITTER OFF.
Make sure throttle control is all the way back (down). Make sure all trim controls are in the
1.
middle position.
Turn the transmitter on.
2.
Plug in battery to Vector Kite™
3.
Follow the diagrams on the opposite page to make sure the controls function per the
4.
illustrations.
Please note that your transmitter is equipped with
5.
servo reversing switches
inside the
battery compartment (on the left side). If your controls work opposite than the illustrations
or if you prefer opposite stick control than the factory set up, you may change the switch
positions.
Throttle
Control
Trim
Controls
Right Control
Stick in
Neutral
Right Control
Stick Pointing
Back
Right Control
Stick Pointing
Forward
Right Control
Stick Pointing
Right
Right Control
Stick Pointing
Left
Propeller Aligned
Straight
Propeller
Turns
Up
Propeller
Turns
Down
Propeller
Turns
Left
Propeller
Turns
Right
Turn Power
Switch to
'ON' Position
Connect 2 Conductor
Red Plug to
2 Conductor Socket
Summary of Contents for CANARD
Page 1: ......