9532-002-001-11
PSD-TTS-B
Installation Guide
7
Building the stand
Step 1
Unpack the components from the box and set them on the floor. Invert and secure the rubber vinyl or rubber feet depending on model to
the bottom of the base. Secure the aluminum block to the base as shown in (figure 1) to the base by using the five (5) M5 x 30 (mm) Phillip
flat head screws (supplied).
CAUTION
:
Do not over tighten the screws
. Find a suitable location for the stand.
Aluminum
block
Base
(5) M5 x 30 (mm)
Phillips flat head
screws
