![background image](http://html1.mh-extra.com/html/premier-mounts/pp-fcta/pp-fcta_installation-instructions-manual_1596215020.webp)
SPI-PRO
Page 8
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Step 1
Step 2
Place the SpiroLock™ Ceiling Plate into position
against the ceiling.
®
Use a pencil and mark four (4) mounting hole
locations through each of the mounting points (
B
) in
the SpiroLock™ Ceiling Plate.
The target arrow indicates the direction of the
projector screen relative to the projector mount.
Drill a hole at each mark using the appropriate
diameter masonry bit for your wedge anchor.
®
Remove the nut and washer from the wedge anchors.
¯
Insert a wedge anchor into each hole.
If necessary, use a hammer to lightly tap each
wedge anchor into place.
Solid Ceiling Installation
B
B
B
B
Introduction
You can mount the SpiroLock™ projector mount to any solid surface ceiling which has a minimum 6˝ thickness.
For concrete installation use concrete wedge anchors (¼˝ recommended) to secure the mounting hardware and
a masonry drill bit to drill the pilot holes. Wedge anchors and masonry drill bits are not supplied, but you can
purchase them at your local hardware store.
Example Wedge Anchors and Masonry Bit
Not included