![background image](http://html1.mh-extra.com/html/premier-mounts/pp-fcta/pp-fcta_installation-instructions-manual_1596215019.webp)
SPI-PRO
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 7
Wood Stud Installation (cont’d)
Step 4
Insert one (1) #14 x 2˝ screw through each of the
mounting holes (
A
) on the bottom of the SpiroLock™
Ceiling Plate and into the pilot holes.
®
Tighten each screw until the SpiroLock™ Ceiling
Plate is secure against the ceiling.
Do not overtighten the #14 x 2˝ screws.
If applicable, drill a hole above the mounting hole for
wiring access.
A
A
Step 5
Secure the SpiroLock™ and close nipple onto the
Ceiling Plate.
®
Use an M3 Allen wrench to tighten the M6 x 6mm
Lock-It™ screws in the Ceiling Plate and SpiroLock™
twist lock collar.
Do not overtighten the Lock-It™ screws.
¯
Route any cables up through the SpiroLock™ and
into the ceiling structure.
Proceed to
“Attaching the Projector Plate”
on
page 11.
M6 x 6mm Lock-It™
Screws