![background image](http://html1.mh-extra.com/html/premier-mounts/gearbox-equipment-enclosure-gb-plen1/gearbox-equipment-enclosure-gb-plen1_installation-instructions-manual_1596223008.webp)
Page 8
Installation Instructions
GB-PLEN1
Completed Attachment
Padlock Hasp
(optional)
M5 x 10mm
Screws
Step 6.
Place the padlock hasp on the inside of the
GB-PLEN1
(optional).
Step 7.
Use two (2) M5 x 10mm Phillips screws to attach
the padlock hasp to the GB-PLEN1.
Step 8.
Place the cover lid onto the GB-PLEN1 and
secure using four (4) M5 x 10mm screws and
tighten with a Phillips head screwdriver.
When attaching the padlock hasp, make sure
the flat side is resting against the inside wall
of the GB-PLEN1.
The cover lid may be mounted facing either
direction.
M5 x 10mm
Screws
Cover Lid
Completed Installation
If you did not pre-install electrical components,
then you may now install all power and signal
equipment. A qualified electrician should make any
power connections to the GB-PLEN1.