![background image](http://html1.mh-extra.com/html/premier-mounts/gearbox-equipment-enclosure-gb-plen1/gearbox-equipment-enclosure-gb-plen1_installation-instructions-manual_1596223007.webp)
Installation
Instructions
Page
7
GB-PLEN1
GB-PLEN1 Installation with PP-FCMA
Step 1.
Loosen the four (4) mounting screws that are
located on the underside of the PP-FCMA. Do not
completely remove these screws.
Step 2.
Slide the mounting rails (threaded holes facing
up) between the adapter plate and the PP-FCMA.
Step 3.
Once the mounting rails have been positioned,
tighten the mounting screws with the
screwdriver.
Step 4.
Align the mounting slots on the GB-PLEN1 with
the mounting holes on the mounting rails.
Step 5.
Use four (4) M5 x 10mm screws to attach the
GB-PLEN1 to the mounting rails.
PP-FCMA
Mounting
Rails
Adapter Plate
Screwdriver
Mounting Screw
M5 x 10mm Screws
Mounting
Rails
The GB-PLEN1 is designed for use with either the PP-FCMA or PP-FCTA. After installing your
selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1.