ECM-3763D
Page 8
Installation Instructions
Selecting the Mounting Hardware
Insert
the
Thread Depth Indicator into the thread
inserts found on the bottom or top of the
fl
at panel.
Use a pencil to mark the depth of the thread insert
on
the
Thread Depth Indicator, as shown in
Figure
1.
Insert
the
Thread Depth Indicator into the
remaining thread inserts to compare and verify
their
depth.
Locate the correct diameter screw for the thread
insert.
If the screw you selected is longer than the mark
on
the
Thread Depth Indicator, as shown in Figure
2 and Figure 3, do not use this screw. The screw
length must not bypass the mark.
Test each size of the screws provided.
The correct screws should thread easily into the
mount point and not pull out when tension is
applied.
Proceed to the
“Griplate™ Washer Installation”
section.
Inverted
Flat Panel
Figure 1
Figure 2
Figure 3
Thread Depth
Indicator
Thread Depth
Indicator
Depth Mark
Depth Mark
Thread Depth
Indicator
Threaded
Insert
Marking the
Depth
Screw
Screw
