background image

 

CTM-MS4

 

 

 

 

Page - 3 - 

Installation Manual  

Warning Statements

 

 

WARNING

 

PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE 
USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE 
FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED 
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY 
DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF 
WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER 
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS. 

 

 

WARNING: 

THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 300 LBS. IF NOT, THE 
WALL STRUCTURE MUST BE REINFORCED. PROPER INSTALLATION PROCEDURE 
BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION 
INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN 
SERIOUS PERSONAL INJURY, OR EVEN DEATH. 

 

 

WARNING: 

SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE 
INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND TOOLS FOR 
THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY. 

 

 

WARNING: 

PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION 
INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD. THE 
INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY 
AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN 
EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. 

 

 

Indicates that the power plug is to be 
disconnected from the power outlet. 

 

 

Contact Premier Mounts with any 
questions -  (800) 368-9700 

 

 

 

 

 

 

Safety precautions must be taken at all 
times. 

 

 

 

 

 

 

 

 

 

Warning and Caution statements. 

 

 

 

 

 

 

 

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do 
so could result in damage to the flat panel display and/or damage to the mounting surface. 

 

 

 

Do not install near heater, fireplace, direct sunlight, air conditioning or any other source of direct heat 
energy. Failure to do so may result in damage to the flat panel display and could increase the risk of 
fire. 

 

 

 

At least two qualified people should perform the installation procedure. Injury and/or damage can 
result from dropping or mishandling the flat panel display. 

 

 

 

 

Summary of Contents for CTM-MS4



















Reviews: