background image

CTM-MS4 

 

 

 

 

Page 18 

Installation Manual  

9531-000-331-06 

Warranty

 

Limited Lifetime Warranty 

All Premier Mounts products carry a limited lifetime warranty from ship date against defects in materials and 
workmanship. Premier Mounts is not liable for improper installation that results in damage to mounts, adapters, 
display equipment or personal injury. 
 

DISCLAIMER OF WARRANTY.                
THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

 

 

Contact Premier Mounts

 

In the event of missing and/or damage equipment, or technical questions, the following information can help in 
the completion of the installation. 
 
Customer Service – (800) 368-9700 
Technical Support – 

[email protected]

 

 

Notes

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

NORTH AMERICA 

EUROPE 

AUSTRALIA, NEWZEALAND, 

OCEANIA 

(DISTRIBUTOR)

 

3130 East Miraloma Avenue 

Anaheim, CA 92806 USA 

USA and Canada – 

Phone: 800-368-9700 

Fax: 800-832-4888 

Swallow House,  

Shilton Industrial Estate, 

Shilton, Coventry, England CV79JY 

Phone: +44 (0) 2476 614700 

Fax: +44 (0) 2476 614710 

P.O. Box 295 

Mordialloc Victoria 3195 

Australia 

Phone: 03 9586 63 30 

www.premiermounts.com.au 

Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044 

 

©Premier Mounts 2007 

 

 

 

Summary of Contents for CTM-MS4



















Reviews: