CTM-MS4
Page - 10 -
Installation Manual
7.
The Griplate™ has M4, M5 M6 and M8 hole patterns to fit the hardware that your flat panel requires.
EXAMPLE:
If your plasma uses M8 x 20 Phillip screws, use the M8 mounting points (Figure 10).
8.
Once the mounting brackets are aligned, secure the Griplate™ to the flat panel. Use (1) Griplate™ per
mounting point (Figure 11).
NOTE
: The dimples of the top Griplate™ have to be facing up and the bottom Griplate™ dimples must
be facing down.
Dimples Facing Up
Dimples Facing Down
Inverted Flat Panel
Dimples Facing Down
Dimples Facing Up
Phillips Screw Driver
Figure 11
Figure 10
M4 M5 M6 M8
Bottom of the
Flat Panel
Mounting Bracket
Notched Cut Out
Figure 8
Figure 9