Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
3
Page 6
1. Place a level on top of the mount and reinstall or adjust the support screws if necessary.
2.
Secure the first mounting location by sliding a Wall Anchor Plate behind the mount and fasten
using 5/16” x 3 Hex Lag and 5/16” Washer.
3. Maintain a 1/8” minimum gap from the anchor plate and the rail when anchoring.
4. Install the remaining mounting locations while keeping the mount leveled.
LASER / LEVEL
Support
Screw
Edge of
the rail
00.0
o
5/16” x 3”
Hex Lag
5/16 Washer
5/8”-11 Bolt
With Hole
Wall Anchor
Plate
Horizontal
Rail
1/8” min.
gap
Clearance
3” (76.2mm)
Pre-Mounting
Hang Location
