Installation Guide
- TVF
www.premiermounts.com | North America 800.368.9700 | Interna1-714-632-7100
7
Page 12
RE
M
INDE
R
1/8” min.
gap
Clearance
1. Measure the distance from corner to corner with a tape measure.
Place the tape measure tangent on the hole located at the corner of the mount.
2. Measure diagonally opposite and check to see if the two distances matches.
3. Secure the lower mounting location by sliding a Wall Anchor Plate behind the mount
and fasten using 5/16” x 3 Hex Lag and 5/16” Washer.
INSTALL THE LOWER
MOUNTING LOCATIONS
Distance 1
Distance 2
The two diagonal
measured distances
must match
VERY IMPORTANT!
VERIFYING THE DIAGONAL MEASUREMENTS FOR SQUARENESS
