8
9
11
Insert the Power Unit Frame into the Power Unit Fitting on the Spine of the
Front Canard.
Unwrap the King Post Rigging.
12
King Post
Rigging Line
King Post
Rigging
Loop
Rigging
Clip
Connect one side of the King Post Rigging by connecting the
Rigging Clip at the end of the line to the King Post Rigging
Loop on the wing of the kite.
King Post Rigging
Power Unit
Power Unit
Fittings
Front Sail
Power Unit
Spine
9
Make sure the lines are untangled.
Notice the two black marks on the lines.
These black marks indicate the center of the lines.
10
Rear Rigging
Lines
Rear Rigging
Lines
End Cap
Arrow
Knock
End Cap
End Cap
Remove the End Cap from the Spine.
Keep the End Cap near by.
Pull the two black marks into the Arrow Knock.
Make sure the lines do not get tangled.
Replace the End Cap.
Rear
Rigging
Lines
Rear Rigging
Lines
Center of
Line
