D
C
PLEASE NOTE: Although your Vintage RV Spinner is constructed with UV resistant SunTex
TM
fabric, it is recommended that you take it inside
during storms and harsh weather to preserve its durability.
E
Support
Pole
Ground
Stake
ferrule
Step 3
Slide the narrow, plastic tipped end of the Support Pole into Star Lock Hub. Push
down on the hub until The Support Pole locks into place and cannot be removed.
Close Velcro Seam. (Diagram B)
Step 4
Slide the Spinner Axles onto the Wheel Strut Assemblies. Tighten knobs on the "T"
Joints to hold the Axles to the Struts. (Diagram C)
Step 5
Take one of the two Spinner Wheels and slide it onto one the Spinner Axle. Slide
second Spinner Wheel onto Spinner Axle. (Note: Spinner Wheels on same axle
should spin in opposite directions. Before putting second Axle Cap into place,
make sure wheels spin as shown in diagrams C and D.) Pound Axle Caps onto
uncapped ends of Spinner Axle using a mallet or piece of wood. (Diagram D)
Step 6
Drive Ground Stake into ground. Slide assembled Vintage RV Spinner into Ground
Stake. (Diagram E)
Vintage RV Body
Spinner
Axle
"T" Joint
First, slide Spinner
Axle onto
Strut Assembly
Second, tighten
knob on "T" Joint
Wheels on
same axle
should spin
in opposite
directions
Spinner
Wheel
Axle Cap
Slide Spinner
Wheels onto Spinner
Axle, then hammer
Axle Cap onto end
