6
7
Connect the Standoff on the Underwing Spreader to the Fitting on the
Wing Batten. Repeat on the other side with the remaining Standoff.
6
7
Slide the Propulsion Frame into the Fittings on the Spine. Make sure the
hook on the panel at the top of the Frame is towards the head of the kite.
Connect Standoff to
the Wing Batten.
Wing Batten
Underwing Spreader
Slide Propulsion Frame
into Spine Fittings.
Hook should be
towards front of kite
9
Slide the Power Unit all the way into the Propulsion Frame. Make sure
the O-ring on the Power Unit is on the bottom.
8
Attach O-rings
Attach O-rings on the Spine to the hooks on the insides of the Propulsion
Frame struts. Attach the O-rings hanging from the Propulsion Frame to
the hooks on the Underwing Spreaders.
