Page 3
Fit the assembled fan into the
base. Using a screwdriver, lock
the clips (indicated by arrows)
into the base.
OPERATION
Plug the mains lead into a 13 Amp mains socket.
If connecting via an extension lead, make sure that the lead is rated at 3
Amps or more, and that it is fully unwound.
Use the height adjustment knob (see diagram on page 2) to adjust the tube
to the optimum height.
Switch the appliance on at the mains socket.
Use the push-button switches to the speed required:
Oscillation is selected by pressing the oscillation knob downwards (see
diagram on page 2), and switched off by pulling it upwards
It is normal for the motor to become warm in normal use.
Unplug the appliance from the mains when not in use.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill. At
this cost, the EH0527 will cost 8p per day to run on the "low speed" setting, 10½p
per day on the medium speed or 13p per day to run on the "high speed" setting.
