Page 2
IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the user of the product
for future reference.
IDENTIFICATION OF PARTS
ASSEMBLY
Unscrew the plastic nut from the motor housing. Locate the rear guard on the
motor housing - the two holes in the guard align with the two round pegs on the
motor housing. Push the guard firmly into place and secure with the plastic nut.
Insert the motor shaft through the blades, aligning the pin on the motor shaft with
the slot on the back of the blades. Secure the blades in place with the spinner.
Rotate anti-clockwise to tighten
- it has a left-handed thread.
Check that the blades are free to rotate.
Attach the front guard to the rear guard using the clips built into the front guard.
Using a screwdriver, secure the two parts of the guard together with the screw
and nut provided.
