MAX PRO 18
©
Operator Manual
Original Printed in English
3
-
13
SEAL BAR
The Seal Bar needs extended to complete this proce-
dure. In order to do this, the machine needs power
and air. This will cause the Seal Bar to heat up.
•
N
OTE: The machine must be at normal op-
erating temperature for best results. Care
must be taken to avoid scratching the sur-
face of the Seal Bar. Use the supplied
cleaning tool for best results. Remember
to retract the Seal Bar when finished.
1.
Power up the machine according and apply air to
regulator.
2.
Release the E
-
Stop Button and press the Green
Power Button.
3.
Allow Seal Bar to reach set temperature.
4.
Access the Service Screen from the Main
Screen. The Service Screen is passcode protect-
ed. See Supervisor to gain access.
5.
Press the Extend Seal Bar Button to change the
state of the Seal Bar.
6.
NEVER use any metallic utensils on the surface
of Seal Bar. Use the Cleaning Wand (Sharp P/N
704173
-
01) to remove any residue accumulated
on the Seal Bar.
7.
Press the Seal Bar Retracted Button to retract
the Seal Bar.
8.
Return to Main Menu.
Extended Seal Bar
SECTION 3
-
SET
-
UP & OPERATION
Summary of Contents for 1174-02
Page 2: ...INTENTIONAL BLANK PAGE ...
