The Rear Panel
The rear panel view of the PoE switch consists of an AC Power Connector
AC Power Connector
Plug the female connector into the switch and male connector into the power outlet. This product supports
input voltages 100 – 240 VAC, 50/60 Hz.
PACKAGE CONTENTS
PoE Switch: 8 Port 10/100/1000Base-TX with 8 Port PoE Switch
AC Power Cord
Four (4) adhesive-backed rubber feet
User’s Manual
IMPORTANT: If any piece is missing or damaged, please contact your local dealer or reseller for service.
NETWORK APPLICATION
This section provides a few examples of networked topology which are used. PoE switch is designed as a
segment switch that has a large address table and high performance to deal with interconnecting networking
segments. PC, workstations, and servers can communicate with each other by directly connecting with the PoE
switch. The switch automatically learns nodes addresses, which are subsequently used to filter and forward all
traffic based on the destination address. The PoE switch can provide power to PDs that follow the IEEE
802.3af/at standard in the network and solves the problem of position limitation. The network devices can be
installed in more appropriate position for better performance. The following figure is an example of network
application for Power over Ethernet Switch.
