25
Metal bracket
PCB board
Monitor screen
Signal board
3-10 Built-in camera and monitor replacement
Monitor screen is mounted inside door shell, and the pin hole camera is located on the right side of the
chamber, there are two points need to pay more attention when disassemble the subassembly.
(1) Take down black cover fixed by eight M3*10 screws, then you will see six screws to fix the door shell, refer
to fig 3
‐
29.
(2) Take down door shell, replace relevant components.
Fig 3
‐
29 Safety door subassembly
Monitor subassembly relationship is described like fig 3
‐
30.
Fig 3
‐
30 Monitor screen subassembly
Note: Monitor and its PCB connection style is push
‐
pull way strange form LCD, refer to fig 3
‐
31.
Fig 3
‐
31 Push
‐
pull style
26
TOPEX service manual
Monitor system wiring diagram
Monitor system power supply is control by stop button,yellow line is video signal, refer to fig 3
‐
22.
Fig 3
‐
32 Monitor system wiring diagram
3-11 LED backlight replacement
LED backlight replacement needs to pay attention to plus
‐
n
‐
minus,refer to fig 3
‐
33.
Fig 3
‐
33 LED backlight
3-12 Push style electromagnet replacement
Push electromagnet is use to open the door automatically, located right side of chamber, its work voltage is
24V controlled by main control board, refer to fig 3
‐
34.