7
User Manual
All illustrations in this manual are for information purposes only and may differ from the product supplied by us.
Remarks:
1. The default control mode is ‘Always on’. You can adjust this by turning on the device and setting it to your preferred
mode. See the section above.
2. The equipment can be set to standby mode because the standard control function is connected to the power supply.
The device is in standby mode when the Switch is pressed at the moment the device is switched on. After that, you can
set the time or adjust the mode.
3. You can select the control function by setting the switch on ‘Mode options’ (3). The time can be set by adjusting ‘100’,
‘10’ and ‘1’. Then press ‘Enter’ to confirm the setting.
4. After that, press ‘Switch’ to continue working with these settings.
5. The time cannot be adjusted in ‘always on’ mode. The default digital number will be displayed as ---
6. In ‘Timer Mode’ and ‘Cycle Mode’, the time is set and displayed in minutes.
7. Thus, when the display shows ‘567’, this means 567 minutes.
Description of the three switching modes
