14 - UPGRADING YOUR COMPUTER
Graphic board
The computer contains one or two Graphic boards
installed in the PCIE x16 slots. The detail
configuration will be differed by different models.
Removing the Graphics board
1.
Perform the
Pre-installation instructions on
page 2
.
2.
Disconnect the power cables from the
graphics board.
3.
Remove the three screws that secure the
graphics board to the chassis.
Summary of Contents for ORION 3000
Page 1: ...PREDATOR ORION 3000 USER S MANUAL...
Page 12: ...8 UPGRADING YOUR COMPUTER 4 Pull both sides of the HDD carrier 1 then remove the hard drive 2...
Page 23: ...UPGRADING YOUR COMPUTER 19 5 Remove the thermal pad from the SSD module...
Page 27: ...UPGRADING YOUR COMPUTER 23 5 Remove the thermal pad from the SSD module...
