12 - UPGRADING YOUR COMPUTER
Removing a memory module
1.
Perform the
Pre-installation instructions on
page 2
.
2.
Remove the graphics board. See
3.
Press outward the holding clips on both sides
of the DIMM slot outward to release the
memory module (1).
4.
Gently pull the memory module upward to
remove it from the DIMM slot (2).
5.
Repeat steps 3~4 to remove the other
memory modules.
Summary of Contents for ORION 3000
Page 1: ...PREDATOR ORION 3000 USER S MANUAL...
Page 12: ...8 UPGRADING YOUR COMPUTER 4 Pull both sides of the HDD carrier 1 then remove the hard drive 2...
Page 23: ...UPGRADING YOUR COMPUTER 19 5 Remove the thermal pad from the SSD module...
Page 27: ...UPGRADING YOUR COMPUTER 23 5 Remove the thermal pad from the SSD module...
