Precor M9.33i, Owner'S Manual

Page: 57 / 86

Owner’s Manual: Advanced Programming and Troubleshooting 55
Viewing the Hour Meter
HOUR METER appears on the display followed by the
number of hours that the unit has been in use. The
treadmill tracks the elapsed minutes, but the value that
appears is truncated to the nearest full hour.
3. When you are ready, press ENTER to move to the next
display (software version).
Viewing the Software Version and Part Numbers
SW VERSION appears on the display followed by the
upper board software version and part number (for
example, 47475-205).
4. To see the upper application serial number, upper boot
part number, lower board’s serial number, and upper
application software part number use the arrow keys. If
needed, you can move through all four—upper
application, upper boot, lower board, and upper
application software—using the arrow keys.
5. Write the numbers below. You will need these numbers
when you call Customer Support with display-related
questions. This information will help rule out any
software-related problems:
UPPER APP: ___________________
UPPER BOOT: ___________________
LOWER: ___________________
UPPER APP: _____________
6. When you are ready, press ENTER to move to the next
display (error log).
M9.3xi_Owners Manual.book Page 55 Wednesday, December 14, 2005 1:10 PM