Discovery™ Series Squat Rack (608) Assembly Guide
To assemble your equipment, follow the steps in the order listed in this assembly guide. For
more product information, visit us at
www.precor.com
.
WARNING
At least two people are required to assemble the equipment.
DO NOT attempt assembly by yourself.
Assembly requirements
When assembling the equipment, we recommend you:
Unpack the box and assemble the equipment close to where you plan to use it.
Locate the equipment at least 79 inches (2 meters) away from walls or furniture on
either side of the equipment, and 79 inches (2 meters) away from objects behind or in
front of the equipment.
Assemble the unit on a solid, flat surface, so that it remains level and stable.
DO NOT move the equipment without assistance.
Required tools
10 mm hex bit
Specifications
Equipment Dimensions:
67” L x 64” W x 74” H (1705 mm L x 1615 mm W x 1885 mm H)
Equipment Weight:
273 lb (124 kg)
Hardware kit
Component
Quantity
Component
Quantity
Socket head cap bolt (M12 x 35 mm)
8
Hex key (10 mm)
1
Flat washer (13 mm x 26 mm)
8
Storage horn bumper
4
Socket head cap bolt (M12 x 50 mm)
4
Weight storage horn
4
Flat washer (13 mm x 20 mm)
4
Begin assembly
Important
DO NOT fully tighten the fasteners until instructed to do so.
To assemble the Squat Rack:
1.
Have your assistants hold the two uprights side by side (Figure 1).
2.
Position the base crossbar between the uprights and secure it using four bolts
and four washers .
3.
Position the upper crossbar between the uprights and secure it using four bolts
and four washers .
Note
Position upper crossbar so that the Precor name plate faces inward (Figure 1).
4.
Fully tighten all bolts.
Figure 1
