Cardio Theater DVD Integrated Bracket Assembly Instructions
page 7
7.
Align the tab on top of the DVD Integrated
Bracket Assembly with the grab bar. (The top of
the tab rests on top of the grab bar.)
8.
Attach the DVD Player bracket assembly to the
pivot tube.
Align the hole in the upright on the DVD
Integrated Bracket Assembly to the left side of
the pivot tube. Reinsert the left pivot bolt in the
pivot tube and tighten with a
⁷⁄₃₂
-inch hex key.
Do not fully tighten the bolt at this time.
9.
Carefully gather the cables above pivot tube so
nothing will get pinched when the bracket cover
is reinstalled.
10. Reinstall the bracket cover as described in the
bracket assembly guide.
Important:
Make sure that the bracket cover
flanges are flush against the pivot tube. The
washers and bearings need to remain on the
outside of the bracket flanges.
11. Securely tighten the left pivot bolt in the pivot
tube, but do not fully tighten it at this time.
12. Attach the DVD Integrated Bracket Assembly
to the grab bar.
Drill a hole in the grab bar with
¹⁄₈
-inch bit
through the hole in the tab. Insert the self-
tapping screw and fully tighten.
13. Using a torque wrench and the
⁷⁄₃₂
-inch hex
key, tighten the left pivot bolt to 120 in-lbs.
14. Adjust the LCD Screen and DVD Player for
viewing
8
7
Align tab with
the grab bar.
Grab bar
Attach DVD Integrated
Bracket Assembly to pivot
tube with hex key.
Grab bar
Tab
12
Drill hole, then attach the DVD
Integrated Bracket Assembly
to the grab bar.
Install the DVD Integrated Bracket Assembly on Unit, continued
DVD Integrated Bracket Assembly
