Cardio Theater DVD Integrated Bracket Assembly Instructions
page 6
4
Install the DVD Integrated Bracket Assembly on Unit
Install the DVD
Integrated Bracket
Assembly on Unit
1.
If the bracket cover that covers the connections
for the LCD Screen is installed, remove it. You
will need to loosen but not remove the pivot
tube bolts.
Note:
If you need instructions to remove the
bracket cover, refer to the assembly instruc-
tions that came with the bracket.
2.
Remove the left pivot bolt from the pivot tube.
You will install the DVD Integrated Bracket
Assembly on this side.
3.
With someone holding the DVD Integrated
Bracket Assembly, feed the audio/video cable
up under the pivot tube.
4.
Connect the audio/video connectors to the
appropriate connections on the LCD Screen.
5.
Connect the power cable to the power connec-
tor. The power connector may hang below the
pivot tube.
6.
Move the DVD Integrated Bracket Assembly up
toward the pivot tube and gently feed the
excess cables up under the pivot tube. The
cables will be hidden and protected by the
bracket cover when it is installed later.
1
Bracket
cover
Left pivot bolt
Pivot
tube
Audio/video cable
connectors
Power connector
Power cable
4
