Precor CW-411, Assembly Manual

Page: 13 / 48

CW-411 Assembly Guide
page 13
Assemble the Pads
6 - 1¼” buttonhead screws
6 - split washers
6 - washers
4 - 3” buttonhead screws
4 - split washers
4 - washers
Assemble the Pads
1. Attach the Back Pad to the Back Support using
four 3-inch buttonhead screws (P)
four
5 ⁄
16
-inch split washers (Q)
four
5 ⁄
16
-inch washers (R)
Wrench tighten.
2. Attach the Thigh Pad to the Back Support using
six 1¼-inch buttonhead screws (S)
six
5 ⁄
16
-inch split washers (Q)
six
5 ⁄
16
-inch washers (R)
Wrench tighten.
This completes the assembly of the CW-411.
Clean the Pads and Assembly
To clean the pads, moisten a clean, soft cloth in a
mild solution of soap and water and wipe all the parts
thoroughly. Dry the pads with a clean, dry cloth.
Use the same procedure to clean the main structure.
Frequently vacuum the floor underneath the CW-411 to
prevent the accumulation of dust and dirt.