Precor CW-202, Assembly Manual

Page: 27 / 44

General Safety and Maintenance Manual: Daily Inspection 13
Check Warning Labels and Instruction
Placards
Inspect warning and instructional labels daily tom make sure that all
the information can be clearly read. If any portion is not visible or part
of the label is not adhered properly, replace that label immediately
(refer to
Obtaining Service for purchase information).
Clean labels and placards as needed with a mild soap and water
solution in a spray bottle, and dry thoroughly with a soft cloth.
The following figure shows an example of a user instructional label.
Figure 3 shows a typical user instruction placard.
Figure 3: Sample user instruction placard
Improper use of this machine will result in injury.
Before using, consult a qualified instructor.
Inspect cables and connections and do not use
if any component is worn or damaged.
CAUTION
PULLDOWN 304
Select appropriate lifting weight.
Adjust thigh pad to rest securely
on top of legs.
Grip bar with hands evenly spaced.
Pull bar down to upper chest
with a slow, controlled movement,
pulling handles behind neck is
not recommended, as injuries
could result.
Slowly return to the start position.