Precor CW-116, Assembly Manual

Page: 9 / 44

CW-116 Assembly Guide
page 9
Assemble the Pads
1. Attach the Back Pad to the Back Support using
four 3-inch buttonhead screws (G)
four
5 ⁄
16
-inch split washers (H)
four
5 ⁄
16
-inch washers (J)
Wrench tighten.
2. Attach the Seat Pad to the Main Frame using
four 3-inch buttonhead screws (G)
four
5 ⁄
16
-inch split washers (H)
four
5 ⁄
16
-inch washers (J)
Wrench tighten.
This completes the assembly of the CW-116.
Clean the Pads and Assembly
To clean the pads, moisten a clean, soft cloth in a
mild solution of soap and water and wipe all the parts
thoroughly. Dry the pads with a clean, dry cloth.
Use the same procedure to clean the main structure.
Frequently vacuum the floor underneath the CW-116
to prevent the accumulation of dust and dirt. If
necessary, use the Foot Rest to lift the front end and
tip the CW-116 onto its wheels to roll it to a different
location.
Assemble the Pads
4 - 3” buttonhead screws
4 - split washers
4 - washers
4 - 3” buttonhead screws
4 - split washers
4 - washers