Precor CW-116, Assembly Manual

Page: 8 / 44

CW-116 Assembly Guide
page 8
Assemble the Unit
1. Attach the Main Frame to the Stabilizer using
four ¾-inch buttonhead screws (A)
four
3 ⁄
8
-inch split washers (B)
Wrench tighten.
Note: Make sure the wheels on the Stabilizer are
positioned as shown in the illustration.
2. Attach the Back Support to the Main Frame using
four ¾-inch buttonhead screws (A)
four
3 ⁄
8
-inch split washers (B)
Wrench tighten.
3. Slide the Foot Rest through the Main Frame and
secure it using
one 1¼-inch buttonhead screw (C)
one ½-inch split washer (D)
one ½-inch washer (E)
one spacer (F)
Wrench tighten.
Note: For ease of assembly, place a split washer,
a flat washer, and a spacer onto each screw
before inserting the screw.
Assemble the Unit
4 - ¾” buttonhead screws
4 - split washers
1 - 1¼” buttonhead screw
1 - split washer
1 - washer
1 - spacer
4 - ¾” buttonhead screws
4 - split washers