Precor AB-103, Assembly Manual

Page: 13 / 48

AB-103 Assembly Guide
page 13
Assemble the Unit, continued
5. Slide a Pivot Housing (N) onto each side of the
Back Support cross bar.
6. Attach the Pivot Housings to the Side Supports
using
four 1¼-inch buttonhead screws (F)
four
3 ⁄
8
-inch split washers (G)
four
3 ⁄
8
-inch washers (H)
Wrench tighten the fasteners and the Pivot
Housing set screws.
7. Press the handle on the Back Support and slide
the Foot Adjustment into the Back Support.
Release the handle while the pin is aligned with
one of the holes on the Foot Adjustment. Secure
the Foot Adjustment using
one shoulder bolt (J)
Wrench tighten.
Pivot Housing
V-crunch
4 - 1¼” buttonhead screws
4 - split washers
4 - washers
1 - shoulder bolt