Precor AB-103, Assembly Manual

Page: 12 / 48

AB-103 Assembly Guide
page 12
Assemble the Unit, continued
3. Attach the Center Support. Position the Center
Support so the upper arms rest against the Side
Supports. Align the two base mounting holes and
secure the Center Support using
two ¾-inch buttonhead screws (D)
two ½-inch split washers (E)
Wrench tighten.
4. Attach the Handlebars and the upper arms of the
Center Support to the Side Supports using
four 5-inch buttonhead screws (A)
eight
¹⁄₂
-inch curved washers (B)
four ½-inch lock nuts (C)
Wrench tighten using a ¾-inch open-end wrench.
2 - ¾” buttonhead screws
2 - split washers
4 - 5” buttonhead screws
8 - curved washers
4 - lock nuts