Precor 9.55, Manual

Page: 7 / 49

9.55 Treadmill
Page 7
Procedure 2.2
- Accessing the Information Display Program
The information display will access the following data;
• Odometer
• Hour meter
• Software version
• Error log
Procedure
1. Plug the power cord into the wall outlet, then turn on the treadmill with the circuit breaker.
2. Press the keys
RESET,6,5,
sequentially.
3. The display will momentarily read,
DIAGS - INFORMATION DISPLAY.
4. The display will momentarily read,
ODOMETER.
5. The treadmill’s odometer will be displayed as
1234567 MPH
or
1234567 KPH.
Note:
The odometer data is stored in non-volatile memory on the upper PCA. If the upper PCA
is replaced the odometer data will be lost.
6. Press the
ENTER
key to proceed to the hour meter display.'
7. The display will momentarily read,
HOUR METER.
8. The operating time of the unit will be displayed as
12345 HOURS
. The operating time is
defined as total amount of time that the unit has operated in program modes with the drive
motor running. The hour meter is also used to provide the “time stamp” for the error code
log.
9. Press the
ENTER
key to proceed to the software version display.
10. The display will momentarily read,
SOFTWARE VERSION.
11. The software versions of the upper and lower PCA’s will be displayed as;
UPPER 1.01 LOWER 1.01.
12. Press the
ENTER
key to proceed to the error log.