Preco PreView WD7102, Operating Manual

Page: 16 / 24

+1.866.977.7326 www.preco.com 3700076F
Copyright 2016
Page 10
Active Screen:
The Active screen is present when the machine has been placed into reverse
and the system is searching for objects in your blind spot. When the sensor
is reporting and there are no objects being detected the Active Screen will
show a green check mark to notify you that the system is working properly.
Active Screen, Clear (Figure 3.1)
When the sensor reports a detection within the maximum detection range
set in the “Distance Alert Screen” (page 8), the check mark will be replaced
by a yellow triangle (Figure 3.2). The audible alert will begin to sound to
notify you that an object has been detected. “Touch to Silence” will be visible
on the screen unless it has been disabled (reference Figure 1.4 in Volume
Adjust Screen section).
Active Screen, Warning (Figure 3.2)
The display provides three different warnings to the machine operator that
change based on the distance to the detected object. 1) The audible
warning sound will increase in rate and volume as the machine gets closer
to the detected object. 2) The yellow triangle’s flash rate will increase in the
same manner as the audible warning. 3) The five zone boxes on the left side
of the screen will continue to illuminate until all five boxes are filled.