Precision Rated Optics OLT-301 SERIES Operation Manual Download Page 26 | Manualshive

Page: 26 / 28

Precision Rated Optics OLT-301 SERIES Operation Manual Download Page 26

26

888-545-1254 | www.PrecisionRatedOptics.com

OLT-301 Series

5.3 Warranty Registration

A warranty registration card is included with the original shipment of equipment. Please take a few moments to
fill out the card and mail or fax it to Precision Rated Optic’s local Customer Service Center to ensure proper
initiation of your warranty term and scope of your warranty.

5.4 Returning Instruments

To return instrument for reasons of yearly calibration or other, please contact the local Customer Service Center
of Precision Rated Optics to obtain additional information and RMA # (Return Materials Authorization number).
And describe briefly reasons for the return of the equipment, to allow us offer you more efficient service.

NOTE

To return the instrument in the case of repair, calibration or other maintenance, please note the following:

•

Be sure to pack the instrument with soft cushion like Polyethylene, so as to protect the shell of the
instrument.

•

Please use the original hard packing box. If use other packing material, please ensure at least 3 cm soft
material around the instrument.

5.5 Contact Customer Service

Please check our web site (www.Precision Rated Optics.com) for updates to this manual and additional
application information. If you need technical or sales support, please contact PRO.

Toll Free: (888) 545-1254

[email protected]

Fax: (415) 358-4602

«
...
24
25
26
27
28
»

Summary of Contents for OLT-301 SERIES





























Reviews:

No comments