www.precisionpower.com
/ For more info please contact
Features and Specifications are subject to
change
P 9
This meter displays dB full scale (dBFS) values and will saturate at 0dBFS (full scale of the ADC). Do make sure to keep the signal below
0dBFS (red color) and with enough headroom (say 10dB) to prevent saturation during the typical audio peaks of a music source.
3.2
Matrix Tab
The matrix DSP object is the DSP object linking inputs to outputs. While very typical on commercial DSP products, it may be new for
some of you. The following section will summarize the basics of configuration.
Matrix switchers work as a “matrix” where:
-
Rows are inputs
-
Columns are outputs
-
And the status(ON/OFF) of the buttons at the crosspoint of rows (inputs) & columns (outputs) will define the routing and
mixing of the audio to one of 8 outputs.
The following configuration shows how the matrix should be configured for a 4way configuration with:
-
Left analog audio input being routed to analog outputs 1-4
-
Right analog audio input being routed to analog outputs 5-8
Note how labels of input channels and output channels followed on the Matrix mixer to simplify your routing.
Let’s illustrate the concept of configuration of this block using a 3way configu 2 subs where both Left & Right signals are being
mixed (combined).
Per channel
mute button
Per channel
Level control
Per channel
monitoring
Per channel
PEQ button
Custom
Label
Analog inputs in
Rows
Digital inputs in
Rows
Crosspoint
buttons (ON)
Mixing happens when
multiple crosspoints are
enabled within a column
