PRECISION DIGITAL ProtEX-MAX PD8-6001 Series, Instruction Manual

Page: 46 / 62

ProtEX-MAX PD8-6001 Explosion-Proof Feet & Inches Meter Instruction Manual
46
Display Parameter Action/Setting
Calib
Calibrate Calibrate 4-20 mA output
(internal reference source
used for scaling the output)
4 mA
4 mA output Enter mA output value read by
milliamp meter with at least
0.001 mA resolution
20 mA
20 mA
output Enter mA output value read by
milliamp meter with at least
0.001 mA resolution
user
User I/O
Assign function keys and
digital I/O
F1
*
F1 function
key *Assign F1-F4 function key
Ack
Acknowledg
e Acknowledge relays
reset
Reset Enter Reset menu
Rst Hi
Reset Max Reset Maximum
Rst Lo
Reset Min Reset Minimum
Rst HL
Reset Max-
Min Reset Maximum & Minimum
relay
Relay Relay menu
Set 1
*
Set Points
1-8 Set Points 1-8
Rly d
Relay
Disable
Relay Disable (all relays)
Rly e
Relay
Enable Relay Enable (all relays)
O Hold
Output Hold Output Hold (all relays)
d Hold
Display
Hold Display Hold (while held low)
Ln1 Hi
Line 1 High Max on line 1
Ln1 lo
Line 1 Low Min on line 1
Ln1 Hl
Line 1
High/Low Max/min line 1
Display Parameter Action/Setting
Ln2 Hi
Line 2 High Max on line 2
Ln2 lo
Line 2 Low Min on line 2
Ln2 Hl
Line 2
High/Low Max/min line 2
F On 1
* Force On
Relay 1 *Force relay 1-4 on
Contrl
Control Control Menu
disabl
Disable Disable
dI I
Digital input
1
Assign digital input 1
– 4
dO 1
Digital
output 1 Assign digital output 1
– 4
ICal
Internal
source
calibration Enter internal source
calibration (used for scaling
the meter without a signal
source)
C CAL
Current
calibration Calibrate 4-20 mA current
input (internal reference
source used for scaling the
input)
C lo
Current low Calibrate low current input
(e.g. 4 mA)
C Hi
Current
high Calibrate high current input
(e.g. 20 mA)
v CAL
Voltage
calibration Calibrate voltage input
v Lo
Voltage low Calibrate low voltage input
(e.g. 0 V)
v Hi
Voltage
high Calibrate high voltage input
(e.g. 10 V)
Diag
Diagnostics Display parameter settings
LED t
LED test Test all LEDs
Info
Information Display software and S/N
information
Erase
Erase Erase MeterView Pro software
stored in meter’s memory