Precision Digital Corporation ProVu PD6200, Instruction Manual

Page: 7 / 46

P
RO
V
U
™ PD6200 Analog Input Rate/Totalizer
Instruction Manual
7
Specifications
Except where noted all specifications apply to
operation at +25°C.
General
Display Line 1: 0.6" (15 mm) high, red LEDs
Line 2: 0.46" (12 mm) high, red LEDs
6 digits: each (-99999 to 999999), with lead
zero blanking.
Display
Intensity Eight user selectable intensity levels.
Default value is six.
Display
Update Rate 5/second (200 ms)
Overrange Display flashes
999999
Underrange Display flashes
-99999
Display
Assignment
Display lines 1 & 2 may be assigned to
rate, total, grand total, alternate (rate/total,
rate/grand total, rate/units, total/units, and
grand total/units), set points, max/min, units
(line 2 only), and Modbus input. Additional
displays are available if parameter
total is
off
, and parameter
d-SCAL
is
on
: gross,
alternating gross/net, PV1, PV2, and PCT
(refer to PD6000 instruction manual at
www.predig.com ).
Programming
Methods Four front panel buttons, digital inputs, or
PC with MeterView Pro software.
Noise Filter Programmable from 2 to 199
(0 will disable filter)
Filter Bypass Programmable from 0.1 to 99.9% of
calibrated span
Recalibration All ranges are calibrated at the factory.
Recalibration is recommended at least
every 12 months.
Max/Min
Display Max/min readings reached by the process
are stored until reset by the user or until
power to the meter is turned off.
Rounding Select 1, 2, 5, 10, 20, 50, or 100
(e.g. rounding = 10, value = 123.45,
display = 123.50).
Password
Three programmable passwords restrict
modification of programmed settings and
two prevent resetting the totals.
Pass 1: Allows use of function keys and
digital inputs
Pass 2: Allows use of function keys, digital
inputs and editing set/reset points
Pass 3: Restricts all programming, function
keys, and digital inputs.
Total: Prevents resetting the total manually
Gtotal: Prevents resetting the grand total
manually
Non-Volatile
Memory All programmed settings are stored in
non-volatile memory for a minimum of ten
years if power is lost.
Power
Options 85-265 VAC 50/60 Hz; 90-265 VDC, 20 W max;
12-24 VDC, 12-24 VAC, 15 W max.
Powered over USB for configuration only.
Fuse Required external fuse: UL Recognized,
5 A max, slow blow; up to 6 meters may
share one 5 A fuse
Normal Mode
Rejection Greater than 60 dB at 50/60 Hz
Isolation 4 kV input/output-to-power line
500 V input-to-output or output-to-P+ supply
Overvoltage
Category Installation Overvoltage Category II:
Local level with smaller transient
overvoltages than Installation Overvoltage
Category III.
Environmental
Operating temperature range:
-40 to 65°C (-40 to 149°F)
Storage temperature range:
-40 to 85°C (-40 to 185°F)
Relative humidity:
0 to 90% non-condensing
Connections Removable screw terminal blocks accept
12 to 22 AWG wire, RJ45 for external
relays, digital I/O, and serial communication
adapters.
Enclosure 1/8 DIN, high impact plastic, UL 94V-0,
color: black
Front Panel NEMA 4X, IP65
Mounting 1/8 DIN panel cutout required:
3.622" x 1.772" (92 mm x 45 mm)
Two panel mounting bracket assemblies
are provided.
Tightening
Torque Screw terminal connectors: 5 lb-in
(0.56 Nm)
Overall
Dimensions 4.68" x 2.45" x 5.64"
(119 mm x 62 mm x 143 mm)
(W x H x D)
Weight 9.5 oz (269 g)
Warranty 3 years parts & labor. See Warranty
Information and Terms & Conditions on
www.predig.com for complete details.