Precision Digital Corporation ProVu PD6200, Instruction Manual

Page: 10 / 46

P
RO
V
U
™ PD6200 Analog Input Rate/Totalizer
Instruction Manual
10
USB Connection
Function Programming only
Compatibility USB 2.0 Standard, Compliant
Connector
Type
Micro-B receptacle
Cable USB A Male to Micro-B Cable
Driver Microsoft ® Windows ® XP/Vista/7/8/10
Power USB port provides power to the meter.
DO NOT apply AC or DC power to the
meter while the USB port is in use.
On-Board Digital Input (F4)
Function Reset total, remote operation of front-panel
buttons, acknowledge/reset relays, reset
max/min values. See
Function Keys &
Digital I/O Available Settings on page 39 for
a complete list of capabilities.
Contacts 3.3 VDC on contact. Connect normally
open contacts across F4 to COM
Logic Levels Logic High: 3 to 5 VDC
Logic Low: 0 to 1.25 VDC
Additional I/O Up to 2 external modules, model PDA1044
with 4 digital inputs and 4 digital outputs
each can be added.
Modbus
®
RTU Serial
Communications
Slave Id 1
– 247 (Meter address)
Baud Rate 300 - 19,200 bps
Transmit
Time Delay Programmable between 0 and 199 ms
Data 8 bit (1 start bit, 1 or 2 stop bits)
Parity Even, Odd, or None with 1 or 2 stop bits
Byte-To-Byte
Timeout 0.01
– 2.54 second
Turn Around
Delay Less than 2 ms (fixed)
Note: Refer to the P
RO
V
U
Modbus Register Tables located
at www.predig.com for details.
MeterView Pro
Availability Download directly from meter or from
www.predig.com/download_software
System
Requirements Microsoft
®
Windows
®
XP/Vista/7/8/10
Communications USB 2.0 (for programming only)
(Standard USB A to Micro USB B)
RS-232 adapter, RS-485 adapter and
RS-485 to USB converter
(programming, monitoring, and data
logging)
Configuration Configure meters one at a time
Power USB port provides power to the meter.
DO NOT apply AC or DC power to the
meter while the USB port is in use.