ProtEX-MAX PD8-6210 Explosion-Proof Analog Input Batch Controller
Instruction Manual
9
Key Features
Connections for PD8-6210-6H7 & PD8-6210-7H7
The Only Explosion-Proof Batch Controller You Will Ever Need
The ProtEX-MAX PD8-6210 explosion-proof batch
controllers are specifically designed for displaying
flow rate and total from flowmeters with analog
outputs.
The first thing you notice about the PD8-6210 is its
modern looking, rugged, die-cast aluminum housing
with convenient mounting flanges. Housed inside this
enclosure is a dual-line, 6-digit display that is usually
setup to show the current batch quantity and the
batch preset on the two lines. START, BATCH, and
STOP buttons (which can be operated remotely or
without removing the cover) come setup by default for
batch control operation. The START button starts the
batch. The BATCH button shows the preset value.
The STOP button pauses or stops the batch.
The PD8-6210 is approved as a complete product by
FM and CSA and also carries ATEX and IECEx
certification. One of the more convenient features of
the PD8-6210 is its through-glass SafeTouch buttons
which allow the controller to be operated without
removing its cover. Just put your finger on the glass
over the button to actuate it. The PD8-6210 can also
provide 5, 10, or 24 VDC to power the flowmeter.
A ProtEX-MAX batch controller can be programmed
for a wide variety of applications. Setup is easy for
single or multi-stage batching. Automatic overrun
correction keeps the batch size accurate, even over
time. The PD8-6210 can display the number of
batches that have been run and the total amount of
product that has been batched. These features and
capabilities can easily be programmed without
removing the cover using SafeTouch buttons in a
hazardous area or with free MeterView Pro PC-based
software in a safe area.
