ProtEX-MAX PD8-6200 Explosion-Proof Analog Input Rate/Totalizer Instruction Manual
48
Advanced Features Menu
To simplify the setup process, functions not needed for most applications are located in the
Advanced
Features
menu.
Press and hold the Menu button for three seconds to access the advanced features of the meter.
Advanced Features Menu & Display Messages
The following table shows the functions and messages of the
Advanced Features
menu in the order they
appear in the menu.
Display
Parameter
Action/Setting
filter
Filter
Set noise filter value
bypASs
Bypass
Set filter bypass value
Round
Round
Set the rounding value
for display variables
seriAl
Serial
Set serial communication
parameters
SlaveId
Slave ID
Set slave ID or meter
address
baud
Baud rate
Select baud rate
Tr dLY
Transmit
delay
Set transmit delay for
serial communication
Parity
Parity
Select parity
Even, Odd, or None with
1 or 2 stop bits
t-byt
Time byte
Set byte-to-byte timeout
SelEct
Select
Enter the Select menu
(function, cutoff, out)
Functn
Signal input
conditioning
Select linear, square root,
programmable exponent,
or round horizontal tank
function
Linear
Linear
Set meter for linear
function and select
number of linearization
points
Display
Parameter
Action/Setting
No PtS
Number of
points
Set meter for 2 to 32-
point linearization
Square
Square root
Set meter for square root
extraction
Prog E
Programmabl
e exponent
Set meter for
programmable exponent
and enter exponent value
rht
Round
horizontal
tank
Set meter for round
horizontal tank volume
calculation
Inch
Dimension(c
m)
Calculate volume in
gallons or meters
diamr
Diameter
Enter the tank’s diameter
in inches
Length
Length
Enter the tank’s length in
inches
CutofF
Cutoff
Set low-flow cutoff
Count
Count
Set total and grand total
count direction
Tot C
Total Count
Set total to count up or
down
Gtot C
Grand Total
Count
Set grand total to count
up or down
C Strt
Count Start
Set start for total or grand
total countdown
www.
GlobalTestSupply
.com
Find Quality Products Online at:
