Precision Digital Corporation PRO VU Series, Manual, Page: 8 / 8

PD6210 / PD6310
P
ro
V
U
®
Batch c ontrollers
www.predig.com
LDS6210_E 05/16
Precision Digital corPoration
233 South Street • Hopkinton MA 01748 USA • Tel (800) 343-1001 • Fax (508) 655-8990
Isolated 4-20 ma t ransmitter o utput
o utput source:
Rate/process, total, grand total, max, min, set points 1-8,
manual control setting, or Modbus input
scaling r ange:
1.000 to 23.000 mA for any display range
c alibration:
Factory calibrated: 4.000 to 20.000 = 4-20 mA output
a nalog o utput Programming:
23.000 mA maximum for all parameters:
Overrange, underrange, max, min, and break
a ccuracy:
± 0.1% FS ± 0.004 mA
t emperature Drift:
0.4 μA/
°C max from 0 to 65°C ambient,
0.8 μA/
°C max from -40 to 0°C ambient
Note: Analog output drift is separate from input drift.
Isolated t ransmitter Power supply:
Terminals I+ & R: 24 VDC ± 10%.
Isolated from the input at >500 V. May be used to power the 4-20 mA
output or other devices. All models rated @ 40 mA max.
external l oop Power supply:
35 VDC maximum
o utput l oop r esistance:
Power supply Minimum Maximum
24 VDC 10
Ω
700
Ω
35 VDC (external) 100
Ω
1200
Ω
serial c ommunications
Protocol:
Modbus
®
RTU
c ontroller a ddress/slave ID:
1 - 247
Baud r ate:
300 - 19,200 bps
t ransmit t ime Delay:
Programmable between 0 and 199 ms or
transmitter always on for RS-422 communication
Data:
8 bit (1 start bit, 1 or 2 stop bits)
Parity:
Even, odd, or none with 1 or 2 stop bits
Byte-to-Byte t imeout:
0.01 - 2.54 seconds
t urn a round Delay: Less than 2 ms (fixed)
Note: Refer to the P
RO
V
U
®
Modbus Register Tables located at www.predig.com for details.
Digital I/o expansion module
c hannels:
4 digital inputs & 4 digital outputs per module
system:
Up to 2 modules for a total of 8 inputs & 8 outputs
Digital Input l ogic:
High: 3 to 5 VDC Low: 0 to 1.25 VDC
Digital o utput l ogic:
High: 3.1 to 3.3 VDC Low: 0 to 0.4 VDC
source c urrent:
10 mA maximum
sink c urrent:
1.5 mA minimum
+5 V t erminal:
To be used as pull-up for digital inputs only.
4-r elay expansion module
r elays:
Four Form A (SPST) rated 3 A @ 30 VDC and 125/250 VAC
resistive load; 1/14 HP (≈ 50 watts) @ 125/250 VAC for inductive loads.
or Der InG InForma t Ion
P
ro
V
U
®
PD6210 a nalog Input
85-265 Va c
model
12-24 VDc
model
o ptions Installed
PD6210-6R2 PD6210-7R2 2 Relays
PD6210-6R4 PD6210-7R4 4 Relays
PD6210-6R5 PD6210-7R5 2 Relays & 4-20 mA Output
PD6210-6R7 PD6210-7R7 4 Relays & 4-20 mA Output
To order SunBright display models replace the “R” with “H” (i.e. PD6210-6H2)
Note: 24 V flowmeter power supply standard on all models.
P
ro
V
U
®
PD6310 Pulse Input
85-265 Va c
model
12-24 VDc
model
o ptions Installed
PD6310-6R2 PD6310-7R2 2 Relays
PD6310-6R4 PD6310-7R4 4 Relays
PD6310-6R5 PD6310-7R5 2 Relays & 4-20 mA Output
PD6310-6R7 PD6310-7R7 4 Relays & 4-20 mA Output
To order SunBright display models replace the “R” with “H” (i.e. PD6310-6H2)
Note: 24 V flowmeter power supply standard on all models.
a ccessories
model Description
PDA1002 DIN Rail Mounting Kit for Two Expansion Modules
PDA1004 4-Relay Expansion Module
PDA1044 4 Digital Inputs & 4 Digital Outputs Module
PDA1232 RS-232 Serial Adapter
PDA1485 RS-422/485 Serial Adapter
PDA7485-I RS-232 to RS-422/485 Isolated Converter
PDA7485-N RS-232 to RS-422/485 Non-Isolated Converter
PDA8232-N USB to RS-232 Non-Isolated Converter
PDA8485-I USB to RS-422/485 Isolated Converter
PDA8485-N USB to RS-422/485 Non-Isolated Converter
PDX6901
Suppressor (snubber): 0.01 μF/470 Ω, 250 VAC
Your l ocal Distributor is:
Notes:
1. Panel cutout required: 1.772" x 3.622" (45mm x 92mm)
2. Panel thickness: 0.040 - 0.250" (1.0mm - 6.4mm)
3. Mounting brackets lock in place for easy mounting
4. Clearance: Allow 6" (152 mm) behind the panel
DImens Ions
Disclaimer
The information contained in this document is subject to change without notice. Precision Digital
Corporation makes no representations or warranties with respect to the contents hereof, and
specifically disclaims any implied warranties of merchantability or fitness for a particular purpose.
©2011-2016 Precision Digital Corporation. All rights reserved.
3.61"
(91.5 mm)
4.17"
(106 mm)
4.68"
(119 mm)
1.76"
(44.5 mm)
0.59"
(15 mm)
4.77"
(121 mm)
2.45"
(62 mm)
(128 mm)
5.05"
Side View Top View
6" (152 mm) Clearance
NO NC NCC NO C NO NC NCC NO C + - R
Optional
Connectors
Installed
Order from:
C A Briggs Company
622 Mary Street; Suite 101
Warminster, PA 18974
Phone: 267-673-8117 - Fax: 267-673-8118
Sales@cabriggs.com - www.cabriggs.com